|
-Back to CHEMSEAL
Product Summary-
TM- Synthacalk is a trademark of Pecora
Corporation, Harleysville, PA
|
|
| |
 |
CHEMSEAL
Chemical-Resistance Chart
|
Chemical-resistant,
joint-face-adhered,
precompressed,
primary
seal for retrofit and new
structural expansion and construction joints where contact with chemicals and chemical dilutions is
expected.
The polysulfide coating is SynthacalkTM GC2+ and
is resistant to the effects of sunlight, rain, snow, ozone, aging,
shrinkage, and daily and seasonal cycling changes caused by temperature
fluctuation.
|
Chemical Resistance Chart |
|
This data should only be used as a guide for chemicals
at room temperature unless otherwise stated. It is recommended to test
the material under actual (or at least simulated) service conditions
before specification and/or use. |
|
|
RECOMMENDED |
|
|
|
Aluminum Sulfate Solution, 50%
Ammonium Chloride Solution, 50%
Ammonium Perchlorate, 15%
Ammonium Perchlorate, 50%
Ammonium Polysulfate
Ammonium Sulfate Solution, 30%
Amyl Alcohol
ASTM Fuel A
ASTM Fuel B
ASTM Fuel C
ASTM Fuel D
Barium Hydroxide, 10%
Borax Solutions, 25%
Boric Acid Solution, 20%
Borohydride Solution
1-4 Butanediol
Butyl Cellosolve
Butyl Dioxitol
Butyl Oxitol
Calcium Chloride Solutions, 50%
Calcium Hydroxide, 20%
Calcium Hypochlorite, 50%
Caustic Potash, 45%
ChlorinatedWater, 1ppm
ChlorinatedWater, 10ppm
ChlorinatedWater, 100ppm
Copper Sulfate Solution, 20%
Cyclohexane
Dibutyl Carbotol
Diethylene Glycol
Ethyl Alcohol
2-Ethyl Hexyl Acrylate
Ethylene Glycol
Ferrous Sulfate, 10%
Fluoboric Acid, 10%
Fuel Oil/Diesel Fuel |
Gasoline, Leaded
Gasoline, Unleaded
Gashol
Heptane
Herbicides
— Marksman
— Banvel
— Aatrex 4L
— Prowl 3.3 EC
— Tri-4
— Treflan
— Serve 24E
— Sonalan E.C.
Hexane
Hexane Glycol
Hydrofluoric Acid, 5%
Hydroflouric Acid, 10%
Hydroflouric Acid, 23%
Hydrogen Peroxide, 3%
Hydrogen Peroxide, 20%
Hydrogen Peroxide, 35%
Isobutyl Alcohol
Isobutyl Isobutryate
Isopropyl Alcohol
Isotearic Acid
Jet Fuel (See ASTM Fuels)
Kerosene
Lacquer Solvents
Linseed Oil
Lubricating Oils
Magnesium Chloride Solution, 20%
Magnesium Hydroxide Solution, 30%
Maleic Anhydride, 25% Slurry
Methanol
Methyl Tert-Butyl Ether, 98%
Mineral Spirits |
Motor Oil 10W/40
N-Butyl Acrylate
N-Butyl Alcohol
NaphthaVM & P
Naphthalene Oil
Oleic Acid
Oxalic Acid, 20%
Paraffinic Oil
Pesticides
— Arrosolo 3.3E
— Eradicane 6.7E
Phenolic Resins
Phosphoric Acid, 50%
Phthalic Andydride, 38% slurry
Potassium Carbonate
Potassium Hydroxide Solution, 25%
Potassium Hydroxide, 50%
Propylene Glycol
SAE 10 Oil
Shell Tellus Oil 46
Skydrol 500B
Soap Solutions
Sodium Bicarbontae Solution, 25%
Sodium Chloride Solution, 25%
Sodium Hydroxide, 50%
Sodium Hydroxide, 50% @ 120°F
Sodium Sulfide, 25%
Stearic Acid, 20%
Sulfuric Acid, 20%
Texanol
Transmission Fluid
Urea, 10%
Urea Ammonium Nitrate, 32%
Vinyl Acetate
Zinc Chloride, 10%
Zinc Nitrate, 17% |
|
|
INTERMITTENT CONTACT |
|
|
|
Acetic Acid, 10%
Acetic Acid, 50%
Acetone
Acrylonitrile
Ammonium Hydroxide Solution, 28%
Carbon Tetrachloride
Ethyl Acetate
Ethyl Acrylate
Ferric Chloride, 50% |
Herbicides
— Dual 8E
— Bicep 6L
Hydrochloric Acid, 20%
Isopropylamine
Methyl Acrylate
Methyl Carbitol
Methyl Ethyl Ketone
Methyl Methacrylate |
Methyl n-Amyl Ketone
Phosphoric Acid, 60%
Phosphoric Acid, 75%
Sodium Cyanide, 5%
1, 1, 1 Trichloroethane
Triton X100
Vinylidene Chloride
Xylene |
|
|
NOT RECOMMENDED |
|
|
|
Acetic Acid, Glacial
Arcosolv PM Acetate
Benzene
Benzoflex 9-88
Benzoic Acid, 5%
Butyl Benzyl Phthalate
Butyl Cellosolve Acetate
Carbon Disulfide
Carbitol Acetate
Cellosolve Acetate
Chromic Acid, 15%
Chromic Acid, 35%
Creosote
Cumene Hydroperoxide
Dimethyl Formanide |
Epichlorohydrin
Ethylene Dichloride
Formic Acid, 90%
2-Furaldehyde
Glycol Ether EM
Hydrochloric Acid, 37%
Isophorone, 97%
Malathion 50
2-Mercaptoethanol
Methyl Cellosolve Acetate
Methylene Chloride
Nitric Acid, 10%
Nitric Acid, 30%
Nitric Acid, 60% |
Pickling Solution
— 20% Nitric Acid, 4% HF
— 17% Nitric Acid, 4% HF
Potassium Permanganate, 6%
Propylene Oxide
Sodium Hypochlorite, 5%
Sodium Hypochlorite, 8%
Solvent 150
Styrene
Sulfuric Acid, 50%
Sulfuric Acid, 66%
Sulfuric Acid, 8% @ 120°F
Tetrahydrofuran
Tetrahydrofurfuryl Alcohol
Toulene |
|
|
-Back to CHEMSEAL
Product Summary- |
 |