Home -- EMSEAL Expansion Joints and Pre Compressed Sealants

    

 


 

Home -- EMSEAL Expansion Joints and Pre Compressed Sealants

   Infrastructure & Civil Products CAD Literature R & D About  Contact Us Search
     
 

 


-Back to CHEMSEAL Product Summary-
 


TM- Synthacalk is a trademark of Pecora Corporation, Harleysville, PA

 

 

 

 

CHEMSEAL
Chemical-Resistance Chart

Chemical-resistant, joint-face-adhered, precompressed, primary seal for retrofit and new structural expansion and construction joints where contact with chemicals and chemical dilutions is expected.

The polysulfide coating is SynthacalkTM GC2+ and is resistant to the effects of sunlight, rain, snow, ozone, aging, shrinkage, and daily and seasonal cycling changes caused by temperature fluctuation.

Chemical Resistance Chart

This data should only be used as a guide for chemicals at room temperature unless otherwise stated. It is recommended to test the material under actual (or at least simulated) service conditions before specification and/or use.


RECOMMENDED    

Aluminum Sulfate Solution, 50%
Ammonium Chloride Solution, 50%
Ammonium Perchlorate, 15%
Ammonium Perchlorate, 50%
Ammonium Polysulfate
Ammonium Sulfate Solution, 30%
Amyl Alcohol
ASTM Fuel A
ASTM Fuel B
ASTM Fuel C
ASTM Fuel D
Barium Hydroxide, 10%
Borax Solutions, 25%
Boric Acid Solution, 20%
Borohydride Solution
1-4 Butanediol
Butyl Cellosolve
Butyl Dioxitol
Butyl Oxitol
Calcium Chloride Solutions, 50%
Calcium Hydroxide, 20%
Calcium Hypochlorite, 50%
Caustic Potash, 45%
ChlorinatedWater, 1ppm
ChlorinatedWater, 10ppm
ChlorinatedWater, 100ppm
Copper Sulfate Solution, 20%
Cyclohexane
Dibutyl Carbotol
Diethylene Glycol
Ethyl Alcohol
2-Ethyl Hexyl Acrylate
Ethylene Glycol
Ferrous Sulfate, 10%
Fluoboric Acid, 10%
Fuel Oil/Diesel Fuel

Gasoline, Leaded
Gasoline, Unleaded
Gashol
Heptane
Herbicides
— Marksman
— Banvel
— Aatrex 4L
— Prowl 3.3 EC
— Tri-4
— Treflan
— Serve 24E
— Sonalan E.C.

Hexane
Hexane Glycol
Hydrofluoric Acid, 5%
Hydroflouric Acid, 10%
Hydroflouric Acid, 23%
Hydrogen Peroxide, 3%
Hydrogen Peroxide, 20%
Hydrogen Peroxide, 35%
Isobutyl Alcohol
Isobutyl Isobutryate
Isopropyl Alcohol
Isotearic Acid
Jet Fuel (See ASTM Fuels)
Kerosene
Lacquer Solvents
Linseed Oil
Lubricating Oils
Magnesium Chloride Solution, 20%
Magnesium Hydroxide Solution, 30%
Maleic Anhydride, 25% Slurry
Methanol
Methyl Tert-Butyl Ether, 98%
Mineral Spirits

Motor Oil 10W/40
N-Butyl Acrylate
N-Butyl Alcohol
NaphthaVM & P
Naphthalene Oil
Oleic Acid
Oxalic Acid, 20%
Paraffinic Oil
Pesticides
— Arrosolo 3.3E
— Eradicane 6.7E
Phenolic Resins
Phosphoric Acid, 50%
Phthalic Andydride, 38% slurry
Potassium Carbonate
Potassium Hydroxide Solution, 25%
Potassium Hydroxide, 50%
Propylene Glycol
SAE 10 Oil
Shell Tellus Oil 46
Skydrol 500B
Soap Solutions
Sodium Bicarbontae Solution, 25%
Sodium Chloride Solution, 25%
Sodium Hydroxide, 50%
Sodium Hydroxide, 50% @ 120°F
Sodium Sulfide, 25%
Stearic Acid, 20%
Sulfuric Acid, 20%
Texanol
Transmission Fluid
Urea, 10%
Urea Ammonium Nitrate, 32%
Vinyl Acetate
Zinc Chloride, 10%
Zinc Nitrate, 17%


INTERMITTENT CONTACT

   

Acetic Acid, 10%
Acetic Acid, 50%
Acetone
Acrylonitrile
Ammonium Hydroxide Solution, 28%
Carbon Tetrachloride
Ethyl Acetate
Ethyl Acrylate
Ferric Chloride, 50%

Herbicides
— Dual 8E
— Bicep 6L

Hydrochloric Acid, 20%
Isopropylamine
Methyl Acrylate
Methyl Carbitol
Methyl Ethyl Ketone
Methyl Methacrylate

Methyl n-Amyl Ketone
Phosphoric Acid, 60%
Phosphoric Acid, 75%
Sodium Cyanide, 5%
1, 1, 1 Trichloroethane
Triton X100
Vinylidene Chloride
Xylene


NOT RECOMMENDED

   

Acetic Acid, Glacial
Arcosolv PM Acetate
Benzene
Benzoflex 9-88
Benzoic Acid, 5%
Butyl Benzyl Phthalate
Butyl Cellosolve Acetate
Carbon Disulfide
Carbitol Acetate
Cellosolve Acetate
Chromic Acid, 15%
Chromic Acid, 35%
Creosote
Cumene Hydroperoxide
Dimethyl Formanide

Epichlorohydrin
Ethylene Dichloride
Formic Acid, 90%
2-Furaldehyde
Glycol Ether EM
Hydrochloric Acid, 37%
Isophorone, 97%
Malathion 50
2-Mercaptoethanol
Methyl Cellosolve Acetate
Methylene Chloride
Nitric Acid, 10%
Nitric Acid, 30%
Nitric Acid, 60%

Pickling Solution
— 20% Nitric Acid, 4% HF
— 17% Nitric Acid, 4% HF

Potassium Permanganate, 6%
Propylene Oxide
Sodium Hypochlorite, 5%
Sodium Hypochlorite, 8%
Solvent 150
Styrene
Sulfuric Acid, 50%
Sulfuric Acid, 66%
Sulfuric Acid, 8% @ 120°F
Tetrahydrofuran
Tetrahydrofurfuryl Alcohol
Toulene


-Back to CHEMSEAL Product Summary-

 

Meet online with EMSEAL:

Infrastructure Expansion Joints and Joint Sealants by EMSEAL

1-800-526-8365 -- 508-836-0280 --  techinfo@emseal.com -- Fax: 508-836-0281

EMSEAL JOINT SYSTEMS LTD. 25 Bridle Lane, Westborough, MA 01581
EMSEAL LLC. 120 Carrier Drive, Toronto, ON M9W 5R1

Last Modified: February 02, 2012



Copyright © 1998-2012 by EMSEAL Joint Systems, Ltd. All rights reserved.
This document may not be reproduced in whole or in part without permission.